carbide plate,tungsten carbide china,Cemented Carbide

carbide plate,tungsten carbide china,Cemented Carbide are widely used for high-quality solid carbide tools such as milling cutters, end mills, drills or reamers. It can also be used.



According to the reports, a petrochemical company in China has used the tungsten trioxide contained of FN-2G denitration catalyst, up to now, the coal-fired boiler denitration device has been continually run stable for more than two years, with its nitrogen oxides (NOx) removal rate of more than 90%, and the ammonia escape concentration of less than 2 milligrams per cubic meter. It is reported that three of the 220 t / h coal-fired boilers in the company have used this coal-fired boiler flue gas denitrification technology, and the lowest solid tungsten carbide rods concentration of nitrogen oxides in the flue gas can achieve to 20mg/m3 after purification, which meets the national and local pollutant emission standards. According to statistics, after this project carried out, the nitrogen oxide emissions would be reduced by about 2867 tons, which effectively improves surrounding air quality of the company and plays a good social benefit.

 Since China has been increasingly strict on the environmental regulations and included the coal-fired boiler emission standards in the environmental binding targets, the handling environmental protection issue of coal-fired boiler flue gas has gotten a lot of attention. According to the status quo of the boiler flue gas properties in China, researchers have proposed a low NOx combustion air staging and selective catalytic reduction flue gas denitrification combined process technology solutions, and they also have developed a selective catalytic reduction of coal-fired boiler flue gas denitrification (SCR) technology, boilers selective catalytic reduction reactor flue gas, ammonia injection components and other key equipment and a series of advanced technology and equipment. In addition, the researchers have developed the FN-2G denitration catalyst, which takes nano titanium dioxide as the carrier, vanadium pentoxide, tungsten trioxide and other metal oxides as an active ingredients, through analyzing the composition of the pollutants in the coal-fired boiler flue gas. Nitrogen oxide is one of the major air pollutants, large amounts of NOx emit directly into the air will cause an acid rain, etc., and bring a large pressure to the environment, also do some tungsten carbide weight damages to the human body, and animals. Currently, the widespread use of mature technology is the SCR technology, in which tungsten trioxide denitration catalyst is suggested to be the core, and translate NOx into nitrogen and water under the presence of ammonia, thus to achieve NOx removing.

First Rare Earth Aluminum Alloy Cable Industrialization Demonstration Base Established

The first rare earth aluminum alloy cable industrialization demonstration base of China Society for the Promotion of Science and Technology Commercialization was established recently. The rare earth aluminum alloy cable is a “rare earth alloy formula” with independent intellectual property rights, which is incorporated into pure aluminum, synthesized by a special process to improve the electrical conductivity, bending performance, creep resistance and corrosion resistance of the cable, making it more stable with a longer life cycle.

According to reports, the current rare earth aluminum alloy cable is mainly used in power transmission and distribution of electric power and industrial and mining enterprises. At present, the Chinese cable market is only 3 to 5 percent in terms of aluminum alloy copper, while countries like Europe, America, and Japan have reached 50 to 75 percent. "China lacks copper resources and needs to import large amounts from abroad every year. The aluminum resources are rich and the price is cheap." Xiaobing Hui, chairman of the China Society for the Promotion of Science and Technology Commercialization said.

Rare earth aluminum alloy is a new type of basic material produced by adding rare earth elements to aluminum, which meets the natural resource endowment Zgcc Cemented Carbide characteristics of Chinese "poor in copper and rich in aluminum", could help save a lot of copper resources.

At present, rare earth aluminum alloy cables have been listed by the National Development and Reform Commission in the list of critical products and services for strategic emerging industries. Rare-earth aluminum alloy products are of great significance both in terms of the scarcity of national resources and in terms of the superiority of economic costs.

The first rare earth aluminum alloy cable industrialization demonstration base establishment is not only conducive to driving the ability of the cables in the transformation of scientific and technological achievements, but also enhancing the core competitiveness of the technology industry. It also helps to optimize Carbide Rods Double Holes the technological industry environment and accelerate market application development. The completion of the first technology industrialization base also marks a solid step forward for Chinese science and technology industrialization.

Tungsten market continues to be light, not much change in transaction price

Tungsten market : mainstream market continued to light , and the transaction price not much change due to mines and cargo operators reluctant to sell sentiment strong, ore, tungsten concentrate purchases more difficult, prompting two days of tungsten concentrates offer a slight uplift. Ferrotungsten market continued deserted, poor turnover , factory orders rarely , businesses and more caution , quotation and inquiry Water Well Drilling have not changed much . Tungsten scrap market continues to maintain a stable situation , where the height of the tungsten scrap material resources tight , the price is relatively strong, scrap tungsten steel business mentality calm, the price adjustment will is not strong , steady watching the majority. Expected short-term maintenance of stability of tungsten ore market or continue to run .

High Air Pressure Drill Bits Molybdenum market : Despite the current domestic market outlook, business confidence has dropped , some speculators and even low-cost shipping cash, but later the trend is not clear, the major manufacturers maintain the sidelines. Affected by low inventory levels , businesses and sell on the unwilling and Steel Merchants bidding to admission. Expected short-term or temporary stability molybdenum market , having to be lifted .
rock drill bits

Tool and Die Maker jobs in Wallaceburg | Production Supervisor jobs

Reporting to and under the direction of assigned Build Leader, this position is responsible for:

The spotting, fitting, and assembling of the various components of molds/dies according to customer specifications and requirements and as directed.


  • The position of Mold Maker is an hourly-rated position.
  • The work is performed on a two-shift basis with shift rotation.
  • Should be capable of building a complete mold/die under minimal supervision and guidance.
  • Must: be able to handle and operate all hand, air and other tools associated with the trade;
  • Have good work attendance;
  • Be wholesale drill bits capable of reading and interpreting blueprints, drawings;
  • Be available to travel to customer locations if and when necessary;
  • Be able to work independently or with others;
  • Be able to safely operate an overhead crane system and auxiliary equipment.
  • Able to spot and fit mold components,
  • Polish mold surfaces.
  • Able to operate cut-off saws, mills, lathes, surface grinders, drill presses, etc

Required Education, Skills and Qualifications

  • Minimum education level required is Grade 12 or taper drill bits equivalent.
  • The successful completion of a Certificate of Qualification as a Mold Maker coupled with a minimum of 5 years of verifiable experience in the trade is preferable.
  • ライブドアブログ